01924 240291

Total: £0.00

0

Your basket is currently empty.

Garment Collector Locker

Code: D151801

Standard colours
Black
Blue
Dark Grey
Light Grey
Racing Green
Traffic Red
Yellow
Pastel colours - note pastel colours incurr a 0% surcharge
White 9010

£157.42 +VAT

£188.90 inc VAT

Select Extras

Master Key
M Series Masterkey M Series Masterkey

M Series Masterkey

£16.80 ea
+vat
Lock
M Series Ronis Standard Camlock M Series Ronis Standard Camlock

Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting.  They are a none cost option when ordered with metal lockers and are factory fitted.  Replacements also available at additional cost.

M Series Ronis Standard Camlock

£0.00 ea
+vat
M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required).  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available.

M Series Hasp & Staple Latch Lock

£0.00 ea
+vat
  • Steel garment locker to deposit soiled clothing or workwear
  • Aids efficient organisation of clothing
  • Can be used alongside our garment dispensing lockers
  • FREE Delivery to most of the UK Mainland – Orders over £150
  • Delivery to Ground floor entrance OR Nearest off-loading point*
  • Delivery: 18 working days
  • Leadtimes are an indication only and may increase/decrease subject to manufacturing capacity at time of order.
  • Installation of lockers - it is important to install your lockers in a safe and secure manner, please see our locker installation guide.

Request Callback

Our range of garment dispensing and collecting lockers allow for the storage of clean or dirty workwear and clothing essential for environments where hygiene is of high importance such as the food industry, manufacturing, pharmaceuticals or factories. This garment collector locker has a single door with a cut out post slot for soiled clothing to be posted through for cleaning. Clean workwear can then be distributed to employees through our dispenser locker.

Features

  • Steel construction
  • Single deposit entrance built into locker door
  • Grey body 
  • BioCote antibacterial solution is incorporated into the paint finish to help prevent the spread of harmful bacteria
  • Hooks for laundry collection sack (sack not provided)
  • Sloping tops available - call our sales office on 01924 240291 for more info.
  • Comes with a key operated camlock as standard

 

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

 

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code Height Width Depth
Collector 1778mm 381mm 457mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Ronis Standard Camlock

M Series Ronis Standard Camlock

M Series Hasp & Staple Latch Lock

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers.  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available at additioanal cost.

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

M Series Masterkey

Masterkey override for M sereis standard metal lockers.  

L&F camlocks 95/97series

M Series Number Plate

M Series Number Plate

  • Size 37mm long x 19mm high
  • Fits neatly into M sereis plastic escutcheon plate around lock
  • Rigid plastic with self adhesive backng
M Series Numbered Key Rings

M Series Numbered Key Rings

  • Numbered key rings to match numbering system on locker doors
  • Round discs printed with upto 4 digits long
  • Split pin ring
Delivery

Standard Delivery (UK Mainland only)
Estimated delivery is 18 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

Installation

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

});

What our customers say about us...