01924 240291

Total: £0.00

0

Your basket is currently empty.

M Series Steel Single Door Locker

Code: M12211

A series of lockers of the same overall dimensions, sharing common side panels, manufactured and supplied fitted together. Lockers are available as single Nest 1, Nest 2 or Nest 3 units.

Locker nesting brings efficiencies in manufacture, delivery, installation and space utilisation. Nested lockers can be joined with bolts to create longer runs of lockers.

A series of nested lockers connected together. May be a single depth run, sited against a wall, or a back-to-back run (as an ‘island’ block) opening onto two aisles.

Tiers are the variable number of enclosed vertical storage levels contained within the locker unit. Tiers may also be expressed as the number of doors or compartments within the locker.

What is a nest?


Standard colours
Black
Blue
Dark Grey
Light Blue
Light Grey
Racing Green
Traffic Red
Yellow
Pastel colours - note pastel colours incurr a 5% surcharge
Light Violet
Turquoise
White 9010

£93.24 +VAT

£111.89 inc VAT

Select Extras

Master Key
M Series Masterkey (for Camlocks) M Series Masterkey (for Camlocks)

M Series Masterkey (for Camlocks)

£16.80 ea
+vat
Lock
M Series Standard Camlock M Series Standard Camlock

Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting.  They are a none cost option when ordered with metal lockers and are factory fitted.  Replacements also available at additional cost.

M Series Standard Camlock

£0.00 ea
+vat
M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required).  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available.

M Series Hasp & Staple Latch Lock

£0.00 ea
+vat
M Series 4 Scroll Combination Lock M Series 4 Scroll Combination Lock

The Four Digit Tumbler multi combination locks have 10,000 possible codes sequences.  Ideal for private or staff use.  Number can be changed after each opening to code of choice and scrambled on door closure. A masterkey override is available to reset locks should codes be lost.

M Series 4 Scroll Combination Lock

£40.13 ea
+vat
M Series Digital Combination Lock M Series Digital Combination Lock

Digital combination lock can be seated vertically or horizontally.  No need for keys - users set their own combination number for full time use or for public use whereby code is erased once door is opened.  Supervisor overrride code to reset if code forgotten.  Factory fitted at time of ordering lockers. Masterkey override is not included and is available at checkout.

M Series Digital Combination Lock

£67.79 ea
+vat
M Series Coin Return lock M Series Coin Return lock

Coin return locks are a handy way to lock your lockers whilst ensuring that the key is always returned ready for the next user.  The key is kept captive until a £1 coin is inserted into the box at the rear of the locker.  When the key is returned and the door is opened the £1 coin is returned into the tray for the user to reclaim.  Factory fitted option when ordered with lockers.

M Series Coin Return lock

£35.03 ea
+vat
M Series Ronis Coin Retain Lock M Series Ronis Coin Retain Lock

Create an income stream from your lockers by including a coin retain lock.  Users insert a £1 or 20p coin to be able to lock their locker doors.  The key remains captive until the coin is inserted.  The lock fits easily onto the rear door and has a lockable box to collect the £1 coins. Factory fitted option when ordering lockers.

M Series Ronis Coin Retain Lock

£83.77 ea
+vat
  • Quality UK manufactured steel locker
  • Hat shelf with hanging rail plus 2 coat hooks as standard
  • Superior glossy paint finish to BS3900
  • Choice of lock options at checkout
  • Accessories:  Number Plates, Key Fobs, Sloping Tops and Stands at checkout
  • Delivery: 10 working days

Request Callback

These M Series steel single door lockers are at the top of the tree when it comes to quality of manufacture of steel lockers. Superb paint finish, additional security features such as stiffened doors and inter frame locking make these lockers ideal for schools, colleges, staff rooms and changing facilities.  So if you are looking for a competitivly priced steel locker yet wanting peace of mind offered by a top UK manufacturer, rest assured that the M Series lockers are just that cut above from the rest. Replacement doors and hinges are available to keep your lockers always looking top notch.

  • Large selection of door colours including pastel shades 
  • Please check delivery info tab for delivery leadtimes as these vary according to colour choice.
  • Dark Grey /  Electric Blue / Black / Bitter Chocolate / Fawn / Burgundy & All pastel Colours on 18 working days 
  • Other colours available by request (subject to quantity)
  • Superior selection of widths and depths from dropdown menu
  • Selection of 1,2,3,4,5,6,8 and 10 door compartments
  • All lockers are 1800mm high
  • Epoxy powdered paint finish to BS3900
  • Stiffened doors
  • 3 knuckle hinges welded to frame for additional security
  • Hinges are riveted for easy door replacemnt
  • Square plastic plates around locking mechanism for insertion of number plates(not included)
  • Number plates available at checkout
  • Available as "Nested" lockers (pre-joined side by side in manufacture)
  • Pre-drilled in sides for further nesting on site to create runs of lcokers
  • Anti-bacterial paint finish
  • Suitable for dry areas only
  • Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

Standard Locking Options available:

  • Cam lock - micro sprung disc lock featuing 3000 serial combinations. Comes as standard and supplied with 2 keys.
  • Hasp & Staple - for use with own padlock.

Locking Options available at additional cost at checkout.

  • Multi -User Combination Lock 4 tumbler
  • Digital Combination Lock for public use or private one user setting (battery powered)
  • Coin Return
  • Coin Retain
  • Other locking options on requesst.  Call our sales team on 01924 240291

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs.

Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code Height Width Depth
M12211 1800mm 300mm 300mm
M12311 1800mm 300mm 380mm
M12511 1800mm 300mm 450mm
M12611 1800mm 300mm 500mm
M13311 1800mm 380mm 380mm
M13511 1800mm 380mm 450mm
M13611 1800mm 380mm 500mm
M15511 1800mm 450mm 450mm
M15611 1800mm 450mm 500mm

Height:  1800mm overall height

Widths:  300mm, 380mm, 450mm

Depths:  300mm, 380mm, 450mm, 500mm

Other sizes on request (subject to minimum quantities)  Please call our sales team on 01924 240291 

Top Compartment Height:  329mm

Hanging Compartment Height:  1405mm

Clear Opening width:  Overall width - 50mm

i.e 300mm wide locker - 50mm = 250mm clear opening

Weights: 

300 x 300 : 21kg

300 x 380 : 23kg

300 x 460 : 25kg

380 x 380 : 25kg

The locking options below are availble to buy after adding the product above to your basket.

M Series Standard Camlock

M Series Standard Camlock

  • Standard camlock with 2 keys per lock 
  • Available at checkout at no additional cost
  • Replacement locks and/or keys are available at a later date
M Series Hasp & Staple Latch Lock

M Series Hasp & Staple Latch Lock

  • Hasp & Staple Latch locks for use with padlocks to secure lockers. 
  • Oval handle with round cut out to take a 6mm padlock shaft. (Padlocks not included) 
  • Fitted as a no cost option when ordering lockers.  Replacements available at additioanal cost.
M Series 4 Scroll Combination Lock

M Series 4 Scroll Combination Lock

  • 4 scroll mechanical combination lock
  • 10,000 combinations
  • Ideal combination scroll lock for continuous use by one person
  • Can be re-set to new code on change over of staff
  • Master reset key available at checkout to find lost codes
  • Available at checkout at additional cost
M Series Digital Combination Lock

M Series Digital Combination Lock

  • Battery run with 2 AA batteries
  • Over 15,000 openings
  • Public (reset new code after each opening) and Private use settings(continuous use with same code until reset to new code)
  • Masterkey available to gain access after battery failure
  • Available at checkout at additional cost

 

M Series Coin Return lock

M Series Coin Return lock

  • Coin return locks ensure keys are returned ready for next user.
  • Comes with 2 keys per lock
  • Key is kept captive until £1 coin is inserted.
  • Coin is returned into tray for user to reclaim
  • Available at checkout at additional cost
M Series Ronis Coin Retain Lock

M Series Ronis Coin Retain Lock

  • Create an income stream from lockers
  • Available as £1 or 20p coin retain locks
  • Rear facing box to collect coins
  • 2 keys included kept captive until coin inserted
  • Available as factory fitted option at checkout at additional cost

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey (for Camlocks)

M Series Masterkey (for Camlocks)

Masterkey override for M sereis standard metal lockers.  

L&F camlocks 95/97series

M Series Number Plate

M Series Number Plate

  • Size 37mm long x 19mm high
  • Fits neatly into M sereis plastic escutcheon plate around lock
  • Rigid plastic with self adhesive backng
M Series Numbered Key Rings

M Series Numbered Key Rings

  • Numbered key rings to match numbering system on locker doors
  • Round discs printed with upto 4 digits long
  • Split pin ring
M Series Captive Coathangers

M Series Captive Coathangers

  • Suitable for 450mm deep lockers (minimum depth)
  • Metal captive coat hangers suitable for hanging garments
  • Hangers inserted onto coatrail during manufacture
M Series Sloping Top

M Series Sloping Top

M Series Locker Stands

M Series Locker Stands

Padlock 3 scroll combination

Padlock 3 scroll combination

M Series Installation Nesting Bolts Pack of 25

M Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over.  It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit M Series lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Please click on the PDF icon below to download the specification for this item.

Download Spec Sheet Single Door Locker

Delivery

Standard Delivery Leadtime
Estimated delivery is 10 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!