01924 240291

Total: £0.00

0

Your basket is currently empty.

Mobile Phone Locker 900mm 8h x 2w

Code: A100682
Black
Blue
Light Grey
Racing Green
Traffic Red
Yellow

£339.70 +VAT

£407.64 inc VAT

Select Extras

Master Key
M Series Masterkey M Series Masterkey

M Series Masterkey

£16.80 ea
+vat
Lock
M Series Ronis Standard Camlock M Series Ronis Standard Camlock

Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting.  They are a none cost option when ordered with metal lockers and are factory fitted.  Replacements also available at additional cost.

M Series Ronis Standard Camlock

£0.00 ea
+vat
M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required).  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available.

M Series Hasp & Staple Latch Lock

£0.00 ea
+vat
  • Ideal for battening to walls or free standing  
  • Slimline unit
  • Keys, wallets, phones can be stored within secure compartments
  • 18 working days from order
  • FREE Delivery to most of the UK Mainland – Orders over £150
  • Delivery to Ground floor entrance OR Nearest off-loading point*
  • Delivery: 18 working days
  • Leadtimes are an indication only and may increase/decrease subject to manufacturing capacity at time of order.
  • Installation of lockers - it is important to install your lockers in a safe and secure manner, please see our locker installation guide.

Request Callback

This compact mobile phone locker is  900mm high with 8 compartments in the height and two lockers wide, giving 16 small compartments in total.  This personal item locker is suitable for any busy retail, educational, hospitality, leisure, office or warehouse environment where storage for small valuables is required.  Wallets, mobile phones and keys can be locked away in a secure place, offering peace of mind and increased security.

The locker is supplied pre-drilled for wall mounting and can be bolted together side by side or one on top of the other to create a group of lockers.  Alternatively it can be free standing on its own.  Also available with 8 compartments in a single unit.

Also available as a charging mobile phone locker with 13 amp sockets in each compartment.

Choose from plain steel doors or add perforations at no extra cost to allow visibility of contents inside the locker.  

Camlocks with 2 keys come as standard or choose the hasp & staple lock option to use with your own padlock.  

 Features

  • Choose from 4 or 8 doors
  • Choice of powder coated antibacterial paint finish
  • Semi-concealed hinges
  • Grey RAL 7035 body colour
  • Choose from plain or perforated doors (allows for visual inspection of contents)
  • Sloping tops are available at no extra cost - simply select which option you would like from the drop down box
  • Choice of locking options to buy online.  Contact our sales team for further details on 01924 240291
  • View our mobile phone brochure download here.
  • View a pdf of mobile phone locker dimensions.
  • Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code Height Width Depth
A100682 915mm 500mm 155mm
A100682 915mm 500mm 155mm
A100682 915mm 500mm 155mm
A100682 915mm 500mm 155mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Ronis Standard Camlock

M Series Ronis Standard Camlock

M Series Hasp & Staple Latch Lock

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers.  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available at additioanal cost.

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

M Series Masterkey

Masterkey override for M sereis standard metal lockers.  

L&F camlocks 95/97series

M Series Numbered Key Rings

M Series Numbered Key Rings

  • Numbered key rings to match numbering system on locker doors
  • Round discs printed with upto 4 digits long
  • Split pin ring
M Series Large Number Plate

M Series Large Number Plate

M Series Installation Nesting Bolts Pack of 25

M Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over.  It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit M Series lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Please click on the PDF icon below to download the specification for this item.

Download Mobile Phone Locker Dimensions

Delivery

Standard Delivery (UK Mainland only)
Estimated delivery is 18 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

Installation

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

});

What our customers say about us...