01924 240291

Total: £0.00

0

Your basket is currently empty.

Laminate 1220H x 300W x 460D Two Door Locker

Code: LAM/SILV4818/2PO
Beech
Dark Grey
Dust
Electric Blue
Lime
Lime Yellow
Pearly White
Red Dynasty
Walnut

£153.02 +VAT

£183.62 inc VAT

Select Extras

Master Key
Probe Master Key Probe Master Key

Master keys for lockers are a handy piece of equipment and should be only issued to supervisors or personnel in charge of lockers.  Access can be gained to many locker compartments with one master key which fits a series of different locks. Providing controlled  access to locker compartments when either keys are lost or access required urgently.

Probe Master Key

£16.00 ea
+vat
Lock
Probe Type A Standard Camlock Probe Type A Standard Camlock

Camlocks provide added security to metal lockers, cupboards and cabinets.  A traditional and cost effective locking method chosen by locker users due to its simplicity and ease of replacement.

  • Users take charge of the responsibility of locking via keys (2 keys supplied with lock)
  • Camlocks are a no cost option when purchasing lockers from 3d Lockers
  • Choose your locking option at checkout or call us for pricing of your locker requirements. 

Replacement Camlocks

  • Replacement locks and keys available by calling our sales team on 01924 240291

 

Probe Type A Standard Camlock

£0.00 ea
+vat
Probe Type B Swivel Hasp & Staple Lock Probe Type B Swivel Hasp & Staple Lock

Hasp and staple latch locks are an ideal locking solution which transfers the responsibility for locking to the user.  The user is required to secure the locker with a padlock.  This system provides flexibility particularly in schools or areas where keys could easily be lost.

  • Hasp and Staple swivel latch locks are available as a no cost option and can be selected just before checkout.
  • Chrome swivel handle with circular cut out to accomodate padlock
  • Locker is opened by turning oval handle 90 degrees to release cam.
  • Ideally a padlock with a 6mm to 7.5mm diameter should be used, with a top shackle dimension of between 19mm and 25mm.
  • Replacement hasp and Staple locks are available by contacting our sales team on 01924 240291

Probe Type B Swivel Hasp & Staple Lock

£0.00 ea
+vat
  • Steel Carcass with 10mm Solid Grade Laminate Door
  • Designed for Schools & Education
  • Overlay Laminate Doors
  • Easy to Wipe Clean 
  • Range of Door Colours Available
  • Camlocks with 2 Keys or Hasp & Staple Locks
  • Beech & Walnut Minimum 30 Doors
  • FREE delivery to most of UK mainland (orders over £150)
  • Delivery to ground floor entrance or nearest off-loading point*
  • Delivery: 21-28 working days
  • Leadtimes are an indication only and may increase/decrease depending on manufacturing capacity.
  • Installation of lockers - it is important to install your lockers in a safe and secure manner, please see our locker installation guide.

Request Callback

This stylish Laminate 1220H x 300W x 460D Two Door Locker is the ideal choice for education and school environments. Featuring a lower height suitable for smaller pupils, it also has a hard wearing solid laminate door. The door is scratch resistant and easy to wipe down. The carcass is manufactured from strong steel and comes with holes pre-drilled so you can nest multiple lockers together to create a run of lockers.

This shockbox laminate locker is available in a range of vibrant door colours. Please note Magfell Beech and Walnut are available on orders with a minimum of 30 doors only. All other colour options are from stock. This locker is a great alternative to our metal primary school lockers.

Features:

  • Steel silver body
  • 180 degree hinge
  • Hinge securing plate for extra security
  • High security welded compartment divider
  • Internal door stop and sill
  • 10mm solid grade laminate doors
  • Scratch and graffiti resistant
  • Anti bacterial coating to all metal surfaces
  • Camlocks & 2 keys or hasp & staple locks
  • Master keys and numbering plates can be added at checkout
  • Nesting bolts available to add at checkout
  • Manufactured in the UK

* Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver vehicle - assistance will be required for off-loading for larger orders.

It is recommended that lockers are properly installed as tipping could occur. Please refer to our locker installation guide or speak with a sales advisor.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code Height Width Depth
LAM/SILV4818/2PO 1220mm 305mm 470mm

The locking options below are availble to buy after adding the product above to your basket.

Probe Type A Standard Camlock

Probe Type A Standard Camlock

  • Supplied with 2 keys
  • Additional keys available or easily replaced
  • Master Key for supervisor access available
Probe Type B Swivel Hasp & Staple Lock

Probe Type B Swivel Hasp & Staple Lock

  • Chrome swivel hasp & staple/latch lock
  • For use with own padlock (not included)
  • Keyless solution

The accessories below are availble to buy after adding the product above to your basket.

Probe Master Key

Probe Master Key

  • Overrides standard locks
  • Controlled issue key allowing supervisor access to locked compartments
  • Lock type to be Lowe and Fletcher or Ronis
Probe Aluminium Effect Round Number Inc. Cut Into Door

Probe Aluminium Effect Round Number Inc. Cut Into Door

Our MDF laminate faced door lockers can have routed number plates fixed onto the door, creating a numbering system, yet still maintaining the upmarket feel of the locker door.  The routing is done in the factory ready to accept the number at a later date on site.  The number plates are designed for our timber effect and high gloss finish range of lockers.

Probe Engraved Key Fob

Probe Engraved Key Fob

Key fobs to attach to locker keys for locker identification.

P Series Installation Nesting Bolts Pack of 100

P Series Installation Nesting Bolts Pack of 100

Serious injury could be caused by locker or cupboard tip over.  It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit probe lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Delivery

Standard Delivery (UK Mainland only)
Estimated delivery is 21-28 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

});

What our customers say about us...