Probe Charging Laptop Locker, 10 Compartments

These charging laptop lockers from the Probe range are great value laptop storage lockers with the added benefit of being able to charge upto 10 laptops at the same time. With rear mounted 3 pin sockets in each compartment and rear sheet ventilation to allow for heat dissipation, these in charge lockers are ideal for schools, academies, libraries and offices. These laptop lockers are fully CE certified and PAT tested and are also available a 10 door charging laptop locker with individual lockable doors.

Single door
10 internal shelf compartments
Single 3 pin socket in rear of each compartment
Ventilated backs
Strong continuous hinge
Manufactured from 0.9 mm and 0.7 mm thick steel
Conforms to BS 6396: 2008
Choice of locking options available at checkout
Choice of red, blue or white doors
Anti-bacterial paint finish
Simple plug in kettle lead supplied with unit
Quantity discounts available. Please call our sales team on 01924 240291
Power consumption of 1.3 amps per locker unit
Click here for our laptop locker information sheet
Media storage and charging tower locker installation instructions.
Selection of lock options available at checkout.

Product Weight: 42KG

Nesting bolts to suit proble lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly.

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs or into lifts. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Code	Height	Width	Depth
P701518/SD/10/LAPCH	1780mm	380mm	525mm
LAP/701518/SD/10/CH/USB	1780mm	380mm	525mm

Height: 1780mm

Width: 380mm

Depth: 525 mm

Compartment Height: 160mm

The locking options below are availble to buy after adding the product above to your basket.

Probe Type A Standard Camlock

Supplied with 2 keys
Additional keys available or easily replaced
Master Key for supervisor access available

Probe Type B Swivel Hasp & Staple Lock

Chrome swivel hasp & staple/latch lock
For use with own padlock (not included)
Keyless solution

Probe Type P 4 Digit Combination Lock

4 Digit Combination Lock - Type P for use with probe lockers. Use service key and code change button to easily reset.

10,000 combinations
Press and hold change button, rotate wheels to set new code
Scramble after each use
Service key override or code reset to default setting.
Ideal use for schools and staff lockers to eliminate the need for keys
Moulded outercase for easy to turn operation

Probe Type L Digital Combination Lock

40,000 Combinations
Emergency access using service key
Easy to use

The accessories below are availble to buy after adding the product above to your basket.

Probe Master Key

Overrides standard locks
Controlled issue key allowing supervisor access to locked compartments
Lock type to be Lowe and Fletcher or Ronis

Probe Engraved Key Fob

Key fobs to attach to locker keys for locker identification.

Probe Plastic Number Plates

Suitable for PROBE lockers
Plastic number plates with white backgrounds and black lettering
Slips neatly into plastic holder plate on locker door and reveals itself as a round disc
Ideal for locker identity

Padlock 3 scroll combination

P Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over. It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit probe lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Please click on the PDF icon below to download the specification for this item.

Download Laptop Spec Sheet

Download Charging Manual

Download LapBox Data Sheet

Standard Delivery (UK Mainland only)
Estimated delivery is 15-20 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £15.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

Master Key
	Probe Master Key Probe Master Key Master keys for lockers are a handy piece of equipment and should be only issued to supervisors or personnel in charge of lockers. Access can be gained to many locker compartments with one master key which fits a series of different locks. Providing controlled access to locker compartments when either keys are lost or access required urgently.	£16.35 ea +vat
Lock
	Probe Type A Standard Camlock Probe Type A Standard Camlock Camlocks provide added security to metal lockers, cupboards and cabinets. A traditional and cost effective locking method chosen by locker users due to its simplicity and ease of replacement. Users take charge of the responsibility of locking via keys (2 keys supplied with lock) Camlocks are a no cost option when purchasing lockers from 3d Lockers Choose your locking option at checkout or call us for pricing of your locker requirements. Replacement Camlocks Replacement locks and keys available by calling our sales team on 01924 240291	£0.00 ea +vat
	Probe Type B Swivel Hasp & Staple Lock Probe Type B Swivel Hasp & Staple Lock Hasp and staple latch locks are an ideal locking solution which transfers the responsibility for locking to the user. The user is required to secure the locker with a padlock. This system provides flexibility particularly in schools or areas where keys could easily be lost. Hasp and Staple swivel latch locks are available as a no cost option and can be selected just before checkout. Chrome swivel handle with circular cut out to accomodate padlock Locker is opened by turning oval handle 90 degrees to release cam. Ideally a padlock with a 6mm to 7.5mm diameter should be used, with a top shackle dimension of between 19mm and 25mm. Replacement hasp and Staple locks are available by contacting our sales team on 01924 240291	£0.00 ea +vat
	Probe Type P 4 Digit Combination Lock Probe Type P 4 Digit Combination Lock 4 Digit Combination Lock - Type P for use with all probe lockers including metal, timber effect and glossbox. Masterkey will be required to reset lost codes - available at checkout.	£24.56 ea +vat
	Probe Type L Digital Combination Lock Probe Type L Digital Combination Lock The digital combination lock is simple to program, has 40,000 combinations and has emergency access using a master reset code. Single user is supplied as standard but a multi user option is available. The batteries last up to 50,000 operations. Manual master override key is available at checkout. This lock can also be used horizontally (subject to minimum order quantity). Auto lock and unlock programming available	£64.76 ea +vat

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading

Probe Charging Laptop Locker, 10 Compartments - 1 Door