Tab Box 8 Comp Tablet Locker 1000mm

Tab Box 8 Comp Tablet Locker 1000mm means you can store and also charge tablets, apple devices, IT equipment and netbooks in one place. Each compartment can be used as a storage locker only or you can add a 3 pin plug and USB connector so you can leave media devices to charge while not in use.

All our Tab Box lockers are CE marked and have been tested and passed using BS6396:2008. Charging lockers have a kettle lead at the back to plug into a mains socket. They also feature a perforated rear panel for heat dissipation when tablets are charging.

You can select lock options at the checkout stage and also add numbered discs for locker identification.

Features:

All charging units CE marked
Suitable for tablets, apple iPads and netbooks
All doors secured to the frame by a solid hinge
Manufactured from 0.9mm steel
Rear perforated panel for heat dissipation
Choice of locking options
Kettle lead at the back
Tested and passed to BS 6396:2008
Made in the UK

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs or into lifts. Single driver Vehicle – Assistance will be required for off-loading of large orders.

It is recommended that lockers are properly installed as tipping could occur. Please refer to our locker installation guide or speak with a sales advisor.

Code	Height	Width	Depth
TAB/401212/8/8/P/None	1000mm	305mm	305mm
TAB/401212/8/8/V/None	1000mm	305mm	305mm
TAB/401212/8/8/P/Plug	1000mm	305mm	370mm
TAB/401212/8/8/V/Plug	1000mm	305mm	370mm
TAB/401212/8/8/USB	1000mm	305mm	370mm
TAB/401212/8/8/USB	1000mm	305mm	370mm

The locking options below are availble to buy after adding the product above to your basket.

Probe Type A Standard Camlock

Supplied with 2 keys
Additional keys available or easily replaced
Master Key for supervisor access available

Probe Type B Swivel Hasp & Staple Lock

Chrome swivel hasp & staple/latch lock
For use with own padlock (not included)
Keyless solution

Probe Type P 4 Digit Combination Lock

4 Digit Combination Lock - Type P for use with probe lockers. Use service key and code change button to easily reset.

10,000 combinations
Press and hold change button, rotate wheels to set new code
Scramble after each use
Service key override or code reset to default setting.
Ideal use for schools and staff lockers to eliminate the need for keys
Moulded outercase for easy to turn operation

Probe Type L Digital Combination Lock

40,000 Combinations
Emergency access using service key
Easy to use

The accessories below are availble to buy after adding the product above to your basket.

Probe Master Key

Overrides standard locks
Controlled issue key allowing supervisor access to locked compartments
Lock type to be Lowe and Fletcher or Ronis

OK 25mm Round Numbered Key Fobs

Numbered key fobs to attach to locker keys
Ideally matched with plastic number plates for easy locker compartment identification.
25mm in diameter with a split ring.
Choose your own number sequence.
£10 carriage charge applies if ordering separtely from lockers.

OK 25mm Round Numbered Key Fobs

Numbered key fobs to attach to locker keys
Ideally matched with plastic number plates for easy locker compartment identification.
25mm in diameter with a split ring.
Choose your own number sequence.
£10 carriage charge applies if ordering separtely from lockers.

Probe Nesting Bolts Pack of 25

Nesting bolts to suit proble lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly.

Please click on the PDF icon below to download the specification for this item.

Download Tab Box Spec Sheet

Download Charging Manual

Download Data Sheet

Standard Delivery (UK Mainland only)
Estimated delivery is 8-15 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £15.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

Master Key
	Probe Master Key Probe Master Key Master keys for lockers are a handy piece of equipment and should be only issued to supervisors or personnel in charge of lockers. Access can be gained to many locker compartments with one master key which fits a series of different locks. Providing controlled access to locker compartments when either keys are lost or access required urgently.	£15.00 ea +vat
Lock
	Probe Type A Standard Camlock Probe Type A Standard Camlock Camlocks provide added security to metal lockers, cupboards and cabinets. A traditional and cost effective locking method chosen by locker users due to its simplicity and ease of replacement. Users take charge of the responsibility of locking via keys (2 keys supplied with lock) Camlocks are a no cost option when purchasing lockers from 3d Lockers Choose your locking option at checkout or call us for pricing of your locker requirements. Replacement Camlocks Replacement locks and keys available by calling our sales team on 01924 240291	£0.00 ea +vat
	Probe Type B Swivel Hasp & Staple Lock Probe Type B Swivel Hasp & Staple Lock Hasp and staple latch locks are an ideal locking solution which transfers the responsibility for locking to the user. The user is required to secure the locker with a padlock. This system provides flexibility particularly in schools or areas where keys could easily be lost. Hasp and Staple swivel latch locks are available as a no cost option and can be selected just before checkout. Chrome swivel handle with circular cut out to accomodate padlock Locker is opened by turning oval handle 90 degrees to release cam. Ideally a padlock with a 6mm to 7.5mm diameter should be used, with a top shackle dimension of between 19mm and 25mm. Replacement hasp and Staple locks are available by contacting our sales team on 01924 240291	£0.00 ea +vat
	Probe Type P 4 Digit Combination Lock Probe Type P 4 Digit Combination Lock 4 Digit Combination Lock - Type P for use with all probe lockers including metal, timber effect and glossbox. Masterkey will be required to reset lost codes - available at checkout.	£22.54 ea +vat
	Probe Type L Digital Combination Lock Probe Type L Digital Combination Lock The digital combination lock is simple to program, has 40,000 combinations and has emergency access using a master reset code. Single user is supplied as standard but a multi user option is available. The batteries last up to 50,000 operations. Manual master override key is available at checkout. This lock can also be used horizontally (subject to minimum order quantity). Auto lock and unlock programming available	£59.42 ea +vat

Easy Payment Options

FREE Standard UK Delivery

Request A Quote

Over 25 Years Trading

Tab Box 8 Comp Tablet Locker 1000mm