01924 240291

Total: £0.00

0

Your basket is currently empty.

Metal Lockers Two Door

Code: P2D

A series of lockers of the same overall dimensions, sharing common side panels, manufactured and supplied fitted together. Lockers are available as single Nest 1, Nest 2 or Nest 3 units.

Locker nesting brings efficiencies in manufacture, delivery, installation and space utilisation. Nested lockers can be joined with bolts to create longer runs of lockers.

A series of nested lockers connected together. May be a single depth run, sited against a wall, or a back-to-back run (as an ‘island’ block) opening onto two aisles.

Tiers are the variable number of enclosed vertical storage levels contained within the locker unit. Tiers may also be expressed as the number of doors or compartments within the locker.

What is a nest?


Standard colours
Black
Blue
Multi-Coloured
Probe Green
Probe Yellow
Silver
Traffic Red
White
Autumn colours
Probe Autumn Jade
Probe Autumn Lemon
Probe Autumn Ocean
Probe Autumn Orange
Probe Autumn Purple
Black
Silver
White

£101.36 +VAT

£121.63 inc VAT

Select Extras

Master Key
Probe Master Key (for camlocks) Probe Master Key (for camlocks)

Master keys for lockers are a handy piece of equipment and should be only issued to supervisors or personnel in charge of lockers.  Access can be gained to many locker compartments with one master key which fits a series of different locks. Providing controlled  access to locker compartments when either keys are lost or access required urgently.

Probe Master Key (for camlocks)

£16.00 ea
+vat
Lock
Probe Type A Standard Camlock Probe Type A Standard Camlock

Camlocks provide added security to metal lockers, cupboards and cabinets.  A traditional and cost effective locking method chosen by locker users due to its simplicity and ease of replacement.

  • Users take charge of the responsibility of locking via keys (2 keys supplied with lock)
  • Camlocks are a no cost option when purchasing lockers from 3d Lockers
  • Choose your locking option at checkout or call us for pricing of your locker requirements. 

Replacement Camlocks

  • Replacement locks and keys available by calling our sales team on 01924 240291

 

Probe Type A Standard Camlock

£0.00 ea
+vat
Probe Type B Swivel Hasp & Staple Lock Probe Type B Swivel Hasp & Staple Lock

Hasp and staple latch locks are an ideal locking solution which transfers the responsibility for locking to the user.  The user is required to secure the locker with a padlock.  This system provides flexibility particularly in schools or areas where keys could easily be lost.

  • Hasp and Staple swivel latch locks are available as a no cost option and can be selected just before checkout.
  • Chrome swivel handle with circular cut out to accomodate padlock
  • Locker is opened by turning oval handle 90 degrees to release cam.
  • Ideally a padlock with a 6mm to 7.5mm diameter should be used, with a top shackle dimension of between 19mm and 25mm.
  • Replacement hasp and Staple locks are available by contacting our sales team on 01924 240291

Probe Type B Swivel Hasp & Staple Lock

£0.00 ea
+vat
Probe Type H Coin/Token Keep Lock Probe Type H Coin/Token Keep Lock

Coin retain locks fitted to lockers allow users to be charged a nominal £1 for useage of the locker facility.  A box is fitted to the rear of the door to collect coins and can easily be emptied by administrator. Key is held captive in lock until coin inserted.  When the door is unlocked again the coin is retained in the collection box and the key is captive again.each lock

  • Locks are factory fitted to our lockers and cannot be retro fitted to existing doors with camlocks
  • Includes 2 keys
  • New dual lock designed to accept new (2017 coins) and old £1 coins

Probe Type H Coin/Token Keep Lock

£64.38 ea
+vat
Probe Type H Coin/Token Return Lock Probe Type H Coin/Token Return Lock

Coin return locks factory fitted to lockers. Provides increased control over key loss.  Key is held captive until coin is inserted.  Key is then used to lock the door. When the door is opened once again the coin is returned to the user via a tray and the key is held captive once again.

  • 2 keys supplied per lock.
  • Key held captive until coin inserted.
  • Replacement coin return locks available

Probe Type H Coin/Token Return Lock

£24.44 ea
+vat
Probe Type L Digital Combination Lock Probe Type L Digital Combination Lock

The digital combination lock is simple to program, has 40,000 combinations and has emergency access using a master reset code.  Single user is supplied as standard but a multi user option is available.  The batteries last up to 50,000 operations.  Manual master override key is available at checkout.

This lock can also be used horizontally (subject to minimum order quantity).

Auto lock and unlock programming available

Probe Type L Digital Combination Lock

£55.48 ea
+vat
Probe Type Q Auto Scramble Combination Lock Probe Type Q Auto Scramble Combination Lock

Type Q Auto Scramble Combination Lock

This lock is ideal for settings where the same person uses the same locker compartment on a regular basis.

4 scroll combination lock with 10,000 combinations. Can be used with a master re-set key to find the previous code. 

The dials return to 0000 automatically when unlocked to safeguard against code tampering.

Probe Type Q Auto Scramble Combination Lock

£21.09 ea
+vat
Other
Wrist bands Wrist bands

3D locker adjustable plastic wrist bands providing secure storage for locker keys. Wrist straps available in 7 colours and numbered to choice.  Suitable for wet and dry areas. Supplied with free punch to suit most key types.

Key Types include:  Ronis, Lowe and Fletcher, Assa, Ojmar (Some slight adjustments may be necessary on Probe locker keys)

Large easy to read numbers.

Includes Punch, block and rivet set.

Download  available on tab for assembly instructions 

 

Price:  £3.10 each + VAT if ordered with lockers with additional £10+ VAT P&P if ordered seperately.

Wrist bands

£3.00 ea
+vat
  • Great value locker ideal for schools, academies and gyms
  • Reinforced doors for added strength
  • Choose from a range of lock options
  • Delivery: 5-15 working days

 

Request Callback

Two door metal lockers manufactured in the UK to exacting BS standards. Cost effective and durable these two tier metal lockers are ideal for location in any dry environment such as gyms, schools, work places, hospitals and restaurants.  In fact these 2 compartment metal lockers are not only stylish and sleek in looks, they offer practicality with hanging rails and coat hooks.

Providing two doors in the height of the locker and enclosed within an 1700mm carcase, the metal lockers are fully separated into two individual compartments.

So whether you are looking for staff lockers to provide a secure area to store a change of clothing particularly if specific clothing is required to fulfil certain roles, or whether you are looking to store handbags or rucksacks, you can be certain that these two door lockers offer great value.

We’re here to help, so if you have any queries, you can contact us directly by telephone on 01924 240291, or via email on our contact us page.

Fittings included as standard: 

  • Double coat-hook in each compartment
  • Additional coat rails are available to add at checkout (450mm deep only)

 Features of Two Tier Lockers include:

  • Welded channel section to protect against impact damage.
  • Welded door hinges
  • Top quality Active Coat epoxy powder paint finish
  • Carcass ventilation
  • Over 2,000 differs on standard camlocks
  • Plastic cover plate designed to accept compartment numbering and identification
  • Anti-theft shelf preventing access to compartments above door
  • Through frame locking for additional security
  • Choice of 5 sizes to order online, other sizes available, see dimensions
  • Choice of locker widths and depths - select size and nesting options on drop down box

 Door Colours:

Two tier lockers available in any of the above colours including multi-coloured door combinations. Either random or a set pattern. Please click on delivery tab for delivery lead times.  Please note 380w x 380d and 460w x 460d lockers are not available in autumn colours

Standard Lock Options:

  • Camlock with 2 keys (over 2000 differs)
  • Hasp and staple latch lock (for use with own padlock)
  • Both these locks are included free of charge and can be selected at basket.
  • Other locking options available.  See locking options tab above.
  • Coin locks not available on autumn colours

Locker Installation

Our lockers are pre-drilled ready for quick and easy installation.  Here at 3D Lockers we can offer a full installation service on request of see our self installation guide below.

How to install lockers.

Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

* Nearest off-loading point determined by driver. Driver not insured to carry up stairs or use lifts. Single driver vehicle – assistance will be required for off-loading for larger orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Please Note: The vast majority of our products are manufactured to order and cannot be taken back into stock or exchanged after delivery. Further for further information please contact us.

Code Height Width Depth
701212/2 1780mm 305mm 305mm
701215/2 1780mm 305mm 380mm
701218/2 1780mm 305mm 460mm
701515/2 1780mm 380mm 380mm
701818/2 1780mm 460mm 460mm
701518/2/1 1780mm 380mm 460mm

Compartment Height: 812mm

Nominal Clear Entry Widths:

Locker width -64mm

305mm = clear entry 241mm

380mm = clear entry 316mm

460mm = clear entry 396mm

Overall width of 305mm locker Nest 1 is 305mm, likewise for 460mm

Overall width of 305mm locker Nest 2 = 610mm and Nest 3 = 915mm

Overall width of 460mm wide locker Nest 2 @ 920mm and Nest 3 @ 1380mm

Allow up to 2.5mm per locker for horizontal creep

Weights:

305 x 305 : 21kg

305 x 380 : 23kg

305 x 460 : 25kg

380 x 380 : 25kg

The locking options below are availble to buy after adding the product above to your basket.

Probe Type A Standard Camlock

Probe Type A Standard Camlock

  • Supplied with 2 keys
  • Additional keys/locks available or easily replaced on request
  • Master Key for supervisor access available at checkout at additional cost
  • Factory fitted locks as standard at no additional cost
Probe Type B Swivel Hasp & Staple Lock

Probe Type B Swivel Hasp & Staple Lock

  • Chrome swivel hasp & staple/latch lock
  • For use with own padlock (not included)
  • Keyless solution
  • Available at checkout at no additional cost
Probe Type H Coin/Token Keep Lock

Probe Type H Coin/Token Keep Lock

  • Includes box to at rear of door to retain £1 coin/token
  • Key is released when coin/token is inserted
  • Money retained in box
  • Factory fitted
  • Available at checkout at additional cost
Probe Type H Coin/Token Return Lock

Probe Type H Coin/Token Return Lock

  • Ideal for single or multi-users
  • £1 coin or token inserted to release key
  • Coin/token returned to user 
  • Unavailable on autumn colour range
Probe Type L Digital Combination Lock

Probe Type L Digital Combination Lock

  • 40,000 Combinations
  • Emergency access using master service key available at checkout
  • Easy to use with upto 50,000 openings via 2 x AA batteries
  • Available at checkout at additional cost
Probe Type Q Auto Scramble Combination Lock

Probe Type Q Auto Scramble Combination Lock

Type Q Auto Scramble Combination Lock

This lock is ideal for settings where the same person uses the same locker compartment on a regular basis.

4 scroll combination lock with 10,000 combinations. Can be used with a master re-set key to find the previous code. 

The dials return to 0000 automatically when unlocked to safeguard against code tampering.

The accessories below are availble to buy after adding the product above to your basket.

Probe Master Key (for camlocks)

Probe Master Key (for camlocks)

  • Overrides standard locks
  • Controlled issue key allowing supervisor access to locked compartments
  • Lock type to be Lowe and Fletcher or Ronis
Probe Plastic Number Plates

Probe Plastic Number Plates

  • Suitable for PROBE lockers
  • Plastic number plates with white backgrounds and black lettering
  • Slips neatly into plastic holder plate on locker door and reveals itself as a round disc
  • Ideal for locker identity
Probe Engraved Key Fob

Probe Engraved Key Fob

Key fobs to attach to locker keys for locker identification.

Probe Integral Sloping Top

Probe Integral Sloping Top

  • Additional sloping top fitted above locker
  • Stops litter or heavy bags accumulating above the locker
  • Factory fitted or retro fitted.
Probe Interior Hanging Rail 450mm deep lockers only

Probe Interior Hanging Rail 450mm deep lockers only

  • Interior Hanging rail for Probe lockers - Not retro fit- order at checkout with lockers
  • Suits 450mm deep lockers only
  • Suitable for use with own use coat hangers or captive coat hangers
Probe Captive Coathanger for 450mm deep lockers

Probe Captive Coathanger for 450mm deep lockers

  • Hanger for 450mm deep lockers minimum depth
  • Keeps hangers captive on interior hanging rail
  • Ensures hangers are available
Probe Locker stands 150mm

Probe Locker stands 150mm

Wrist bands

Wrist bands

  • Adjustable plastic wrist straps
  • Suitable for all environments including wet areas.
  • Choice of 7 colours, numbered to choice or plain
  • Most major keys can be fitted (minor adjustments with Probe locker keys have to be made)
Padlock 3 scroll combination

Padlock 3 scroll combination

P Series Installation Nesting Bolts Pack of 100

P Series Installation Nesting Bolts Pack of 100

Serious injury could be caused by locker or cupboard tip over.  It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit probe lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Delivery

Standard Delivery Leadtime
Estimated delivery is 5-15 working days. Leadtimes quoted are in indication only, and may increase/decrease depending on manufacturing capacity at time of order. Larger orders may take longer than the estimated delivery leadtime.

Standard Delivery Day and Time
The vast majority of deliveries are made anyday Mon-Fri 8.30am to 5.00pm.

Specific Day and Timed Deliveries
On certain products, it may be possible to request a particular day or time for delivery at additional cost. Please contact us for further information and pricing.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY is available on the vast majority of products for orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Scottish postcodes including HIghlands and Islands, Truro and Belfast are also exempt from free delivery on certain products. Please check product page for further information and contact us for pricing.

Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Delivery Restrictions
Please advise of any delivery restrictions (opening times and vehicle access sizes) prior to order. Failed deliveries will be chargeable.

Please note delivery is to a ground floor entrance or nearest offloading point only which maybe kerbside only. Driver's are not insured to distribute goods around a building or use lifts.

Off loading preparation
For larger orders, assistance will be required in offloading.

See our full delivery and returns policy.

Installation

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.