Need lockers in a hurry? Check out our quick delivery lockers with speedy 3 day delivery. Need next day delivery? Call us on 01924 240291

01924 240291

Total: £0.00

0

Your basket is currently empty.

Police Locker c/w Airwaves & CS holder P3

Code: M1881PGU03
Blue

Blue
Light Blue

Light Blue
Light Grey

Light Grey
Racing Green

Racing Green
Ruby Burgundy

Ruby Burgundy
Traffic Red

Traffic Red
Yellow

Yellow

£149.98 +VAT

£179.98 inc VAT

Select Extras

Master Key
M Series Masterkey M Series Masterkey

M Series Masterkey

£15.00 ea
Lock
M Series Ronis Standard Camlock M Series Ronis Standard Camlock

Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting.  They are a none cost option when ordered with metal lockers and are factory fitted.  Replacements also available at additional cost.

M Series Ronis Standard Camlock

£0.00 ea
M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required).  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available.

M Series Hasp & Staple Latch Lock

£0.00 ea
M Series Ronis Coin Return lock M Series Ronis Coin Return lock

Coin return locks are a handy way to lock your lockers whilst ensuring that the key is always returned ready for the next user.  The key is kept captive until a £1 coin is inserted into the box at the rear of the locker.  When the key is returned and the door is opened the £1 coin is returned into the tray for the user to reclaim.  Factory fitted option when ordered with lockers.

M Series Ronis Coin Return lock

£21.93 ea
M Series Multi User Combination Lock M Series Multi User Combination Lock

The Four Digit Tumbler multi combination locks have 10,000 possible codes sequences.  Ideal for private or staff use.  Number can be changed after each opening to code of choice and scrambled on door closure. A masterkey override is available to reset locks should codes be lost.

M Series Multi User Combination Lock

£25.11 ea
M Series Digital Combination Lock M Series Digital Combination Lock

Digital combination lock can be seated vertically or horizontally.  No need for keys - users set their own combination number for full time use or for public use whereby code is erased once door is opened.  Supervisor overrride code to reset if code forgotten.  Factory fitted at time of ordering lockers. Masterkey override is not included and is available at checkout.

M Series Digital Combination Lock

£42.42 ea
  • Heavy duty locker for storage of all police officers equipment
  • Additional storage of CS canisters and airwaves radios
  • Available in two different sizes
  • Delivery 18 working days from order
  • FREE Delivery to most of the UK Mainland – Orders over £150
  • Delivery to Ground floor entrance OR Nearest off-loading point*
  • Delivery: 18 working days

Request Callback

The police are required to carry numerous heavy items of equipment and bulky uniforms for their job so making sure the correct storage is provided is essential in their everyday life.  Our police locker range not only caters for the storage of uniforms, hats, safety boots and kit bags, the lockers are specially made with a police officer in mind with separate storage for CS canisters and airwave radios.  Divided compartments are provided to make changing into uniforms and storing normal clothing at the start or end of a shift easy.

 Police Locker features

  • Fixed heavy duty top shelf which can hold heavy items
  • Hanging rail
  • Airwaves radio compartment
  • CS canister holder
  • Available in 2 sizes: 450 x 600 or 600 x 600
  • Efficient storage of large clothing items such as stab vests and riot gear
  • Grey body
  • Choice of BioCote paint finishes

Dimensions

  • 1800mm x 450mm x 600mm
  • 1800mm x 600mm x 600m

Locking Options

  • A key operated camlock is supplied as standard
  • Alternatively you can choose a hasp & staple lock to use with a padlock - no extra cost
  • Combination lock
  • A master key is available to buy at the checkout section

3D Lockers are able to make bespoke lockers for the police force, check out our police locker case study for more information or call our sales team on 01924 240291.

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

It is recommended that lockers are properly installed as tipping could occur. Please refer to our locker installation guide or speak with a sales advisor.

Code Height Width Depth
M1581PGU-P3 1800mm 450mm 600mm
M1881PGU-P3 1800mm 600mm 600mm

Two sizes

  • 1800mm high x 450mm wide x 600mm deep
  • 1800mm high x 600mm wide x 600mm deep

The locking options below are availble to buy after adding the product above to your basket.

M Series Ronis Standard Camlock

M Series Ronis Standard Camlock

M Series Hasp & Staple Latch Lock

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers.  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available at additioanal cost.

M Series Ronis Coin Return lock

M Series Ronis Coin Return lock

M Series Multi User Combination Lock

M Series Multi User Combination Lock

M Series Digital Combination Lock

M Series Digital Combination Lock

Battery run with 2 AA batteries

Over 15,000 openings

Public and Private use settings

 

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

M Series Masterkey

Masterkey override for M sereis standard metal lockers.  

Ronis camlocks with cc numbers.

M Series Number Plate

M Series Number Plate

  • Size 35mm long x 18mm high
  • Fits neatly into M sereis plastic escutcheon plate around lock
  • Rigid plastic with self adhesive backng
M Series Numbered Key Rings

M Series Numbered Key Rings

  • Numbered key rings to match numbering system on locker doors
  • Round discs printed with upto 4 digits long
  • Split pin ring
Delivery

Standard Delivery (UK Mainland only)
Estimated delivery is 18 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £10.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

Installation

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

});