We are still operating and delivering as normal during lockdown. Send your enquiries to sales@3dlockers.co.uk or call us on 01924 240291

01924 240291

Total: £0.00


Your basket is currently empty.

Metal Lockers Ten Door

Code: M1221T

When creating runs of lockers, you can order lockers in Nest of 1, Nest of 2 or Nest of 3 to suit your layout. Nested lockers are joined together side by side in manufacture thus sharing common side panels. Locker nesting is more cost effective and offers easier handling and installation.

What is a nest?

Standard colours
Bitter Chocolate

Bitter Chocolate


Carmine Red

Carmine Red
Cornflower Blue

Cornflower Blue
Dark Grey

Dark Grey


Light Grey

Light Grey


Racing Green

Racing Green

Pastel colours - note pastel colours incurr a 5% surcharge
Candy Pink

Candy Pink
Light Violet

Light Violet
Sunburst Yellow

Sunburst Yellow


Annual stocktake from 30th March to 6th April. Please allow additional time for delivery

£189.76 +VAT

£227.71 inc VAT

Select Extras

Master Key
M Series Masterkey M Series Masterkey

M Series Masterkey

£15.00 ea
M Series Ronis Standard Camlock M Series Ronis Standard Camlock

Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting.  They are a none cost option when ordered with metal lockers and are factory fitted.  Replacements also available at additional cost.

M Series Ronis Standard Camlock

£0.00 ea
M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required).  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available.

M Series Hasp & Staple Latch Lock

£0.00 ea
M Series Multi User Combination Lock M Series Multi User Combination Lock

The Four Digit Tumbler multi combination locks have 10,000 possible codes sequences.  Ideal for private or staff use.  Number can be changed after each opening to code of choice and scrambled on door closure. A masterkey override is available to reset locks should codes be lost.

M Series Multi User Combination Lock

£27.87 ea
M Series Digital Combination Lock M Series Digital Combination Lock

Digital combination lock can be seated vertically or horizontally.  No need for keys - users set their own combination number for full time use or for public use whereby code is erased once door is opened.  Supervisor overrride code to reset if code forgotten.  Factory fitted at time of ordering lockers. Masterkey override is not included and is available at checkout.

M Series Digital Combination Lock

£47.09 ea
  • Ideal locker to store small valuables
  • Camlocks or Hasp & Staple locks come as standard
  • Air vent system at the top and bottom
  • FREE Delivery to most of the UK Mainland – Orders over £150
  • Delivery to Ground floor entrance OR Nearest off-loading point*
  • Delivery: 18 working days

Request Callback

By choosing ten door metal lockers, you are squeezing lots of doors into the height of an 1800mm high locker unit and making full use of your space.  Ten tier lockers will provide you with secure small compartment storage, ideal for personal possessions such as keys and purses, but also for high value items such as iPhones, iPads, Notebooks and Tablets.

With many schools and colleges now providing iPads for their pupils, it is a good ideal for secure storage to be available to both staff and students to store this expensive equipment when not in use.  Workplaces, offices and factories, government departments and police forces can also benefit from our 10 door locker.

When purchasing a bank of small lockers, it's a good idea to consider numbering the lockers and this can easily be done with our ivorene number plates.  To compliment the locker numbering system, numbered key fobs for key identification are available to purchase as an accessory.

Ten tier metal lockers are available in many standard colours such as blue, red, yellow, green and light grey with other pastel shades available on a longer lead time and at additional cost. if you are interested in these special colours then you can contact our sales desk at 3D Lockers for further information.  Call us now on 01924 240291

 Features of meal lockers include:

  • All round reinforced doors, spot welded at corners to give enhanced strength
  • Welded vertical channel section stiffens the door for protection against impact damage
  • Complies with BS 4680
  • High quality durable paint finish
  • Interframe locking with a cam engaging into the frame providing additional security
  • Lock cover plate with recesses to accept compatment numbering and identification
  • Carcass ventilation
  • Over 2000 differs on standard locks
  • Anti-bacterial coating to surfaces
  • UK manufactured


  • Lockers can be purchased joined together in Nest 1, 2 or 3 for further economy

Door Colours:

  • Available in any of the above colours
  • Multi-coloured door combinations available to your choice.  Either random or a set pattern.  Just tell us what you want when ordering.
  • Pastel Colour Codes: Candy Pink/BS02C33, Light Violet/BS381C797, Turquoise/RAL6034, Sunburst Yellow/BS10E50.
  • Please check delivery tab for lead times.

Other colours are available on request:

  • Electric Blue, Black, Burgundy and Chocolate
  • Pastel colours are available at an additional cost.  Call our sales team for pricing
  • Black carcass is available - contact us for more information
  • Longer lead times may apply

Standard Lock Options:

  • Camlock with 2 keys (over 2000 differs)
  • Hasp & staple latch lock (to use with own padlock)
  • Both these locks are included free of charge and can be selected at the basket
  • Supervisor masterkey override available at basket

Other Lock Options:

  • Multi-User Combination
  • Coin Return
  • Coin Retain
  • Digital Combination
  • Can be added at the basket or call us for pricing 

Other Accessories:

  • Sloping tops for prevention of litter accumulation
  • Locker stands to raise unit 150mm from floor
  • Ivorene number plates
  • Numbered key fobs
  • Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.
  • Contact our sales team for more information about locker accessories

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs.

Single driver Vehicle – Assistance will be required for off-loading of large orders.


It is recommended that lockers are properly installed as tipping could occur. Please refer to our locker installation guide or speak with a sales advisor.

Code Height Width Depth
M122T 1800mm 300mm 300mm
M1251T 1800mm 300mm 450mm
M1551T 1800mm 450mm 450mm
M1231T 1800mm 300mm 380mm
M1261T 1800mm 300mm 450mm
M1331T 1800mm 380mm 380mm
M1351T 1800mm 380mm 450mm
M1361T 1800mm 380mm 450mm
M1561T 1800mm 450mm 500mm

Three sizes available on line 1800 x 300 x300, 300 x 450 and 450 x 450

Other Dimensions available on request, please call for pricing

1800mm High

300 x 380

300 x 500

380 x 380

380 x 450

380 x 500

450 x 500

550 and 600mm depths are also available

Delivery leadtime increases to 17 -20 days

This locker is approximately 32kg

The locking options below are availble to buy after adding the product above to your basket.

M Series Ronis Standard Camlock

M Series Ronis Standard Camlock

M Series Hasp & Staple Latch Lock

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers.  Oval handle with round cut out to take a 6mm padlock shaft.  Fitted as a no cost option when ordering lockers.  Replacements available at additioanal cost.

M Series Multi User Combination Lock

M Series Multi User Combination Lock

M Series Digital Combination Lock

M Series Digital Combination Lock

Battery run with 2 AA batteries

Over 15,000 openings

Public and Private use settings


The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

M Series Masterkey

Masterkey override for M sereis standard metal lockers.  

L&F camlocks 95/97series

M Series Number Plate

M Series Number Plate

  • Size 35mm long x 18mm high
  • Fits neatly into M sereis plastic escutcheon plate around lock
  • Rigid plastic with self adhesive backng
M Series Numbered Key Rings

M Series Numbered Key Rings

  • Numbered key rings to match numbering system on locker doors
  • Round discs printed with upto 4 digits long
  • Split pin ring
M Series Locker Stands

M Series Locker Stands

M Series Sloping Top

M Series Sloping Top

M Series Nesting Bolts Pack of 25

M Series Nesting Bolts Pack of 25

Nesting Bolts to suit an M Series locker, please allow 4 nesting bolts per side 

Please click on the PDF icon below to download the specification for this item.

Download Ten Door Compartment Dimensions


Standard Delivery (UK Mainland only)
Estimated delivery is 18 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £15.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.


Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!


Sign up to our emails for the latest offers and products

What our customers say about us...