Charging Personal Item locker 900H x 300W x 300D 5 door

Code: MChPE5D900

Select size

Select nest

Select colour

QTY:

£400.54 +VAT

£480.65 inc VAT

Select Extras

Master Key
	M Series Masterkey M Series Masterkey	£16.00 ea +vat
Lock
	M Series Ronis Standard Camlock M Series Ronis Standard Camlock Ronis standard camlocks for use on Link metal lockers come with 2 keys as standard and are fitted using a horseshoe clip fitting. They are a none cost option when ordered with metal lockers and are factory fitted. Replacements also available at additional cost.	£0.00 ea +vat
	M Series Hasp & Staple Latch Lock M Series Hasp & Staple Latch Lock Hasp & Staple Latch locks for use with padlocks to secure lockers (Padlocks not included but can be purchased as an accessory if required). Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available.	£0.00 ea +vat

Charging locker providing a power source and secure storage
Ideal for charging iPods, tablets, mobile phones and other small electrical devices
Simply plug the unit into a power point and it is ready to use
Delivery 25 working days
FREE Delivery to most of the UK Mainland – Orders over £150
Delivery to Ground floor entrance OR Nearest off-loading point*
Delivery: 25 working days

Leadtimes are an indication only and may increase/decrease subject to manufacturing capacity at time of order.

Installation of lockers - it is important to install your lockers in a safe and secure manner, please see our locker installation guide.

Request Callback

This personal item charging locker is an excellent choice to provide a secure, easy and safe solution for storing and charging small electrical items. Can be used in schools, colleges, universities, construction site cabins, commercial offices, gyms and public reception areas. This locker can be used as a charging facility or for storing small valuables in a secure place.

Features Of Charging Personal Item Lockers:

5 compartments
Each compartment is fitted with a side mounted internal socket
All doors and side panels are perforated to help prevent heat build up while charging
Metal to metal earthing on doors
Power lead supplied with fitted RCD plug
RCD protection
Power lead plugs into the small item locker enabling easy replacement of lead if damaged
Fully welded steel door frame
Fully reinforced compartments with in frame locking
Supply voltage 230V
CE Certified
Nesting Bolts Available to add on at check out, please note 4 nesting bolts needed per side.

*Nearest off-loading point determined by driver. Driver not insured to carry up any stairs. Single driver Vehicle – Assistance will be required for off-loading of large orders.

Delivery to Home Addresses: Sorry but we are unable to deliver this product to home addresses.

Code	Height	Width	Depth
MH2215LCS	930mm	300mm	300mm
MH2215LCSST	930mm	300mm	300mm

The locking options below are availble to buy after adding the product above to your basket.

M Series Ronis Standard Camlock

M Series Hasp & Staple Latch Lock

Hasp & Staple Latch locks for use with padlocks to secure lockers. Oval handle with round cut out to take a 6mm padlock shaft. Fitted as a no cost option when ordering lockers. Replacements available at additioanal cost.

The accessories below are availble to buy after adding the product above to your basket.

M Series Masterkey

Masterkey override for M sereis standard metal lockers.

L&F camlocks 95/97series

M Series Number Plate

Size 37mm long x 19mm high
Fits neatly into M sereis plastic escutcheon plate around lock
Rigid plastic with self adhesive backng

M Series Numbered Key Rings

Numbered key rings to match numbering system on locker doors
Round discs printed with upto 4 digits long
Split pin ring

M Series Installation Nesting Bolts Pack of 25

Serious injury could be caused by locker or cupboard tip over. It is important to install your lockers or cupboards side to side, back to back and back to wall. Nesting bolts to suit M Series lockers, please note 4 nesting bolts per side required. Nesting Bolts are supplied as packs of 25, please calculate how many nesting bolts required and order accordingly. Please see our installation guide https://www.3dlockers.co.uk/guides/how-to-install-lockers/

Standard Delivery (UK Mainland only)
Estimated delivery is 25 working days. Mon - Fri 8.30am to 5.00pm.

Standard Delivery Cost (UK Mainland)
FREE DELIVERY on orders over £150.00+vat. A £25.00+vat carriage charge will be applied if the order value falls under this amount.

Free delivery on this product is exempt from all Scottish postcodes, Truro, Belfast and all islands. Please call for pricing.

Standard Delivery (Non UK Mainland)
Delivery to extremities and offshore locations is available by arrangement and at an extra cost.

Delivery To Home Addresses: Sorry but we DO NOT deliver to home addresses at this time. If we deem a delivery is to a home address, we will automatically cancel and refund the order within 5 working days.

Larger orders: The delivery lead time for larger orders could be extended. Please call us on 01924 240291 for up to date delivery times.

Returns Policy: These lockers are manufactured to order. Once in the production stage they cannot be cancelled, returned or exchanged.

Off Loading: Delivery is to a ground floor point only. Driver assistance for offloading will be required for large deliveries.

See our full delivery and returns policy.

Installation Service
Our installation service is available on this product. Please call our friendly sales team on 01924 24291 for more up to date information.

* Subject to area, subject to order quantity.

The contraction of infection from equipment is a recognised risk in the healthcare sector, office and education establishments and public buildings. It is essential to take precautions to reduce the risk of bacterial cross contamination.

Here at 3D Lockers we can provide an effective solution to minimizing these risks. Our storage lockers have a unique anti-bacterial powder coating incorporated at the time of manufacture. BioCote antimicrobial technology offers constant protection against a wide range of bacteria including MRSA, E. coli, Salmonella, Listeria and Campylobacter.

Field tests have proven that storage equipment treated with BioCote powder coating benefit from a 94% reduction in bacteria on their surface, helping to create a cleaner and more hygienic working environment.

BioCote also helps stop the build up of ugly black mould, keeping their appearance for longer.

BioCote will not wear off or leak – it is long lasting and will retain its antimicrobial efficiency for the lifetime of a product!

});